TM 5-2410-241-23-3
0199
REAR BOTTOM GUARDS REMOVAL
000199
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device is in good condition and of suitable
load capacity.
Bottom guards will fall wh n bolts are removed.
e
Debris may accumulate inside bottom guards and add significantly to weight and balance
of bottom guards. Use extreme caution during removal of bottom guards.
Failure to follow these warnings may cause injury or death to personnel.
N OT E
Rear bottom guard weighs approximately 69 lb (31 kg).
Mid-rearward middle bottom guard must be removed before rear bottom guard.
1. Remove mid-rearward middle bottom guard as described in Middle Bottom Guards Removal in this work
package.
1. Install suitable support device under rear bottom guard (Figure 4, Item 4).
2. Remove two bolts (Figure 4, Item 6) and washers (Figure 4, Item 5) from rear bottom guard (Figure 4, Item 4).
3. Remove two nuts (Figure 4, Item 2) and washers (Figure 4, Item 3) from rear bottom guard (Figure 4, Item 4).
4. With assistance, using suitable support device, remove two bolts (Figure 4, Item 1) and washers
(Figure 4, Item 7) and rear bottom guard (Figure 4, Item 4) from machine.
5. Remove support device from rear bottom guard (Figure 4, Item 4).
Figure 4. Rear Bottom Guard.
0199
END OF TASK
