TM 5-2410-241-23-3
0210
REMOVAL CONTINUED
N OT E
Steps 4 and 5 are needed only if guard needs to be removed from machine.
Note harness routing to aid installation.
4. Cut and discard tiedown straps (Figure 3, Item 6) and position wiring harness (Figure 3, Item 9) aside.
5. Remove four nuts (Figure 3, Item 8), washers (Figure 3, Item 7), and guard (Figure 3, Item 1) from cylinder
brackets (Figure 3, Item 2).
6. Remove four nuts (Figure 3, Item 3), washers (Figure 3, Item 4), and mounts (Figure 3, Item 5) from cylinder
brackets (Figure 3, Item 2).
Figure 3. Guard.
0210
END OF TASK