TM 5-2410-241-23-3
0225
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
ROPS weighs approximately 1000 lb (454 kg).
5. Remove six bolts (Figure 2, Item 2), washers (Figure 2, Item 3), bracket (Figure 2, Item 1) and ROPS
(Figure 2, Item 5) from mounting (Figure 2, Item 4).
6. Repeat step 5 for other side of machine.
7. Remove ROPS (Figure 2, Item 5) from machine. Place ROPS on flat surface.
8. Remove lifting device from ROPS (Figure 2, Item 5).
Figure 2. ROPS.
0225
END OF TASK
CLEANING AND INSPECTION
000225
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK