TM 5-2410-241-23-3
0264
REMOVAL CONTINUED
4. Install eye bolt (Figure 2, Item 1) on pin (Figure 2, Item 2).
5. Remove pin (Figure 2, Item 2) from radiator guard (Figure 2, Item 3).
6. Using a lifting device, remove yoke (Figure 2, Item 6) from radiator guard (Figure 2, Item 3) and place on flat
surface.
7. Remove lifting device from yoke (Figure 2, Item 6).
8. Remove two bolts (Figure 2, Item 4) and bracket links (Figure 2, Item 5) from yoke (Figure 2, Item 6).
Figure 2. Pin and Yoke.
0264
9. Remove lip seal (Figure 3, Item 2) from radiator guard (Figure 3, Item 1). Discard lip seal.
Figure 3. Bearing.
0264
END OF TASK
