TM 5-2410-241-23-3
0268
ASSEMBLY CONTINUED
3. Install knuckle (Figure 14, Item 2), pin (Figure 14, Item 3), lock (Figure 14, Item 4), and two bolts (Figure 14,
Item 5) on right push arm (Figure 14, Item 1). Repeat this step for left push arm.
Figure 14. Knuckle.
0268
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Push arm weighs 880 lb (399 kg).
4. Attach lifting device to push arm (Figure 15, Item 5) and place on suitable blocks. Repeat step 4 for other push
arm.
5. With assistance, carefully position two push arms (Figure 15, Item 5) on blade assembly (Figure 15, Item 4).
6. Install pin (Figure 15, Item 1) and push arm (Figure 15, Item 5) on blade assembly (Figure 15, Item 4).
7. Install lock (Figure 15, Item 3) and two bolts (Figure 15, Item 2). Repeat steps 6 and 7 for other side.
8. Remove lifting device.