TM 5-2410-241-23-3
0293
INSTALLATION
000293
WARN I N G
DO NOT perform fuel system checks, inspecions, or maintenance while smoking or near
t
fire, flames, or sparks. Fuel may ignite, causing damage to equipment and injury or death
to personnel.
Allow engine to cool off before performing maintenance on fuel filter. Hot metal parts can
cause severe burns. Wear eye, hand, and skin protection when working with heated parts.
Wear fuel-resistant gloves and eye protecton when handling fuels. If exposed to fuel,
i
promptly wash exposed skin and change fuel-soaked clothing.
Failure to follow these warnings may result in injury or death to personnel or damage to
equipment.
1. Install two clips (Figure 5, Item 2) on hose (Figure 5, Item 1).
2. Install two clips (Figure 5, Item 2), washers (Figure 5, Item 4), and bolts (Figure 5, Item 3) on arctic bracket
(Figure 5, Item 5).
3. Install clamp (Figure 5, Item 6) on fuel hose (Figure 5, Item 1).
4. Install fuel hose (Figure 5, Item 1) on arctic kit heater (Figure 5, Item 7) and tighten clamp (Figure 5, Item 6).
Figure 5. Arctic Kit Heater Fuel Hose.
0293