TM 5-2410-240-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued
LOCATION
ITEM TO BE
CHECKED
ITEM
MAN-
OR
EQUIPMENT NOT
SERVICED
PROCEDURE
READY/AVAILABLE IF:
NO.
INTERVAL HOURS
WARN I N G
System is under pressure. Loosen and
remove fill plug slowly to release
pressure.
Use caution to protect against burns
when draining oil.
Contact with oil can damage skin. Wear
gloves when handling oil. If oil contacts
skin, wash it off immediately.
Lubricating oil is very slippery.
Immediately wipe up any spills.
DO NOT overfill the fluid/reservoir tank.
If a fluid starts to flow out of reservoir/
tank, STOP IMMEDIATELY to avoid
spillage. Immediately clean up spilled
fluid before proceeding with any task.
Failure to follow these warnings may
cause injury to personnel.
60
Monthly
Winch Oil
a. Clean area around oil level fill
Level
plug.
b. Slowly remove oil level check
plug.
c. Maintain oil level at bottom of fill
plug hole.
d. Add oil (WP 0022, Items 17 and
30) as required through fill plug
hole.
e. Install fill plug.
0012-38