TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0001-05 Cylinder #1 Injector Current
Test Step 3: Test Forward Fuel
Below Normal Continued
Injector Harness.
1. Turn ignition and battery dis-
connect switch to OFF
position (TM 5-2410-240-10).
2. Remove jumper wire from E-
C12 (WP 0018, Figure 111)
harness connector terminal 3
and terminal 4.
3. Using digital multimeter
Resistance Less Than 5.0 Ohms
(WP 0283), test for resistance
- Fuel injector is faulty. Replace
between terminal 3 and termi-
fuel injector #1 (WP 0077).
nal 4 at H-C1 (WP 0018, Fig-
Connect E-C12 (WP 0018,
ure 174) harness connector.
Figure 111) to H-C1 (WP 0018,
Figure 174) at valve cover base.
Verify proper operation of machine
(TM 5-2410-240-10).
Resistance 5.0 Ohms or
Greater - Proceed to step 4.
4. Remove valve cover
(WP 0104).
5. Disconnect forward fuel injec-
tor harness terminal H-T3 and
terminal H-T4 (WP 0018,
Figure 269) from fuel injector
#1.
6. Install jumper wire between
terminal H-T3 and terminal H-
T4 (WP 0018, Figure 269) of
forward fuel injector harness.
0019-12