TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0002-02 Cylinder #2 Injector Erratic,
3. At MSD, check if all three
0001-05, 0002-05, and 0003-05
Intermittent, or Incorrect Code
diagnostic codes: 0001-05,
Diagnostic Codes are Active -
Continued
0002-05, and 0003-05 are
Replace engine ECM (WP 0049).
active (WP 0016).
Verify proper operation of machine
(TM 5-2410-240-10).
4. At MSD, check if all three
0004-05, 0005-05, and 0006-05
diagnostic codes: 0004-05,
Diagnostic Codes are Active -
0005-05, and 0006-05 are
Replace engine ECM (WP 0049).
active (WP 0016).
Verify proper operation of machine
(TM 5-2410-240-10).
0002-02 Only Active - Proceed to
Test Step 2.
Test Step 2: Replace Fuel Injec-
tor.
1. Replace fuel injector #2
(WP 0077).
2. Start and run engine to normal
operating temperature
(TM 5-2410-240-10).
3. At MSD, check for active diag- 0002-02 Diagnostic Code Active
- Proceed to Test Step 3.
nostic code 0002-02
No Active Diagnostic Codes -
Verify proper operation of machine
(TM 5-2410-240-10).
Test Step 3: Check ECM Flash
Files.
Verify correct engine ECM flash
Flash Files Bad - Replace ECM
files (WP 0017).
flash files (WP 0017). Verify proper
operation of machine (TM 5-2410-
240-10).
Flash Files Good - Replace
engine ECM (WP 0049). Verify
proper operation of machine
(TM 5-2410-240-10).
0002-05 Cylinder #2 Injector Current
WARN I N G
Below Normal
Electrical shock hazard. Electronic unit injector system uses 67-
73 Volts. Failure to follow this warning may result in injury to per-
sonnel.
