TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0002-05 Cylinder #2 Injector Current
Test Step 3: Test Forward Fuel
Below Normal Continued
Injector Harness.
1. Turn ignition and battery dis-
connect switch to OFF posi-
tion (TM 5-2410-240-10).
2. Remove jumper wire from E-
C12 (WP 0018, Figure 111)
harness connector terminal 1
and terminal 2.
3. Using digital multimeter
Resistance Less Than
(WP 0283), test for resistance
5.0 Ohms - Fuel injector is faulty.
between terminal 1 and termi-
Replace fuel injector #2
nal 2 at H-C1 (WP 0018,
(WP 0077).
Figure 174) harness connec-
Connect E-C12 (WP 0018,
tor.
Figure 111) to H-C1 (WP 0018,
Figure 174) at valve cover base.
Verify proper operation of machine
(TM 5-2410-240-10).
Resistance 5.0 Ohms or Greater
- Proceed to step 4.
4. Remove valve cover
(WP 0104).
5. Disconnect forward fuel injec-
tor harness terminal H-T1 and
terminal H-T2 (WP 0018,
Figure 269) from fuel injector
#2.
6. Install jumper wire between
terminal H-T1 and terminal H-
T2 (WP 0018, Figure 269) of
forward fuel injector harness.
0019-20
