TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0001-06 Cylinder #1 Injector Current
4. At MSD, check if all three
0004-05, 0005-05, and 0006-05
Above Normal Continued
diagnostic codes 0004-05,
Diagnostic Codes are Active -
0005-05, and 0006-05 are
Replace engine ECM (WP 0049).
Verify proper operation of machine
(TM 5-2410-240-10).
0001-06 Only Active - Proceed to
Test Step 2.
Test Step 2: Isolate Problem
with Engine Control Wiring Har-
ness.
1. Turn ignition switch to OFF
position (TM 5-2410-240-10).
Figure 111) harness connector
174) at valve cover base.
3. Turn ignition switch to ON
position (TM 5-2410-240-10).
N OT E
Wait at least 30 seconds for diagnostic codes to become active.
Other fuel injector diagnostic codes may also set, ignore those
codes during this procedure.
4. Start engine or attempt to start
engine (TM 5-2410-240-10).
5. At MSD, check that diagnostic
0001-05 Becomes Active - ECM
code 0001-05 is active (WP
and harness are OK, proceed to
Test Step 3.
0001-06 Remains Active - Pro-
ceed to step 6.
6. Turn ignition and battery dis-
connect switch to OFF posi-
tion (TM 5-2410-240-10).
7. Disconnect ECM harness con-
Figure 102) from engine ECM
J2.
0019-14