TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
N OT E
0110-03 Engine Coolant Temperature
Sensor Voltage Above Normal Code
Wait at least 30 seconds for diagnostic codes to become active.
Continued
4. Using MSD (WP 0016), select
0110-04 Becomes Active - Sen-
engine ECM C6.6 D6K, and
sor is faulty. Replace engine cool-
check if diagnostic code 0110-
ant temperature sensor
04 is active.
(WP 0056).
Remove jumper wire from E-C10
(WP 0018, Figure 110) terminal 1
and terminal 2.
Connect E-C10 (WP 0018,
Figure 110) to engine coolant tem-
perature sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
0110-03 Remains Active -
Proceed to Test Step 4.
Test Step 3: Test Harness Sig-
nal Circuit.
1. Turn ignition switch and bat-
tery disconnect switch to OFF
position (TM 5-2410-240-10).
2. Disconnect engine ECM har-
ness connector E-C1
(WP 0018, Figure 102) from
engine ECM J2.
3. Using digital multimeter
Continuity - Proceed to step 4.
(WP 0283), test for continuity
No Continuity - Engine control
between ECM harness con-
wiring harness is open. Replace
nector E-C1 (WP 0018,
engine control wiring harness
Figure 102) terminal 43 and E-
(WP 0052). Verify proper operation
C10 (WP 0018, Figure 110)
of machine (TM 5-2410-240-10).
harness connector terminal 1.
0019-65