TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0174-04 Fuel Temperature Sensor
12. Using digital multimeter
Continuity - Engine control wiring
Voltage Below Normal Continued
(WP 0283), test for continuity
harness is shorted. Replace
between ECM harness con-
engine control wiring harness
nector E-C1 (WP 0018,
(WP 0052).
Figure 102) terminal 54 and all
Connect FF-C4 (WP 0018,
other terminals on ECM har-
Figure 150) to prime pump temper-
ness connector E-C1
ature sensor.
(WP 0018, Figure 102).
Verify proper operation of machine
(TM 5-2410-240-10).
No Continuity - Proceed to
step 13.
13. Using digital multimeter
Continuity - Engine control wiring
(WP 0283), test for continuity
harness is shorted. Replace
between ECM harness con-
engine control wiring harness
nector E-C1 (WP 0018,
(WP 0052).
Figure 102) terminal 54 and
Connect FF-C4 (WP 0018,
ground.
Figure 150) to prime pump temper-
ature sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
No Continuity - ECM faulty.
Replace engine ECM (WP 0049).
Connect E-C19 (WP 0018,
Figure 115) to FF-C1 (WP 0018,
Figure 147).
Connect FF-C4 (WP 0018,
Figure 150) to prime pump temper-
ature sensor.
Verify proper operation of machine
(TM 5-2410-240-10).
0019-87