TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
N OT E
0174-04 Fuel Temperature Sensor
Voltage Below Normal Continued
Wait at least 30 seconds for diagnostic codes to become active.
5. Using MSD (WP 0016), select 1. 0174-04 Remains Active -
engine ECM C6.6 D6K, and
Proceed to step 6.
check if diagnostic code 0174- 2. 0174-03 Becomes Active -
04 is active.
Replace prime pump tempera-
ture sensor (WP 0070). Verify
proper operation of machine
(TM 5-2410-240-10).
6. Turn ignition switch to OFF
position (TM 5-2410-240-10).
7. Disconnect engine harness to
filter link harness connector
E-C19 (WP 0018, Figure 115)
from filter link harness to
engine harness connector
FF-C1 (WP 0018, Figure 147).
8. Turn ignition switch and to ON
position (TM 5-2410-240-10).
N OT E
Wait at least 30 seconds for diagnostic codes to become active.
9. Using MSD (WP 0016), select 1. 0174-04 Remains Active -
engine ECM C6.6 D6K, and
Proceed to step 10.
check if diagnostic code 0174- 2. 0174-03 Becomes Active -
04 is active.
Replace fuel filter link harness
(WP 0071). Verify proper oper-
ation of machine (TM 5-2410-
240-10).
10. Turn ignition and battery dis-
connect switch and to OFF
position (TM 5-2410-240-10).
11. Disconnect engine ECM har-
ness connector E-C1 (WP
0018, Figure 102) from the
engine ECM J2.
0019-86