TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0133-06 Transmission Pilot
15. Using digital multimeter
Continuity - Proceed to step 16.
Pressure Solenoid Current
(WP 0283), test for continuity
No Continuity - Replace platform wir-
Above Normal - Continued
between pin 3 on platform har-
ing harness (WP 0150, WP 0155).
ness ECM J2 connector PL-C5
Ensure all harness connectors are
(WP 0018, Figure 218) and pin 11
reconnected. Verify proper operation
on platform harness to engine
of machine (TM 5-2410-240-10).
harness connector PL-C15
(WP 0018, Figure 225).
16. Using digital multimeter
Continuity - Proceed to step 17.
(WP 0283), test for continuity
No Continuity - Replace platform wir-
between pin 4 on platform har-
ing harness (WP 0150, WP 0155).
ness ECM J2 connector PL-C5
Ensure all harness connectors are
(WP 0018, Figure 218) and pin 18
reconnected. Verify proper operation
on platform harness to engine
of machine (TM 5-2410-240-10).
harness connector PL-C15
(WP 0018, Figure 225).
17. Using digital multimeter
No Continuity - Proceed to step 18.
(WP 0283), test for continuity
Continuity - Replace platform wiring
between pin 3 on platform har-
harness (WP 0150, WP 0155).
ness ECM J2 connector PL-C5
Ensure all harness connectors are
(WP 0018, Figure 218) and all
reconnected. Verify proper operation
other pins on platform harness
of machine (TM 5-2410-240-10).
ECM J2 connector PL-C5
(WP 0018, Figure 218).
18. Using digital multimeter
No Continuity - Replace machine
(WP 0283), test for continuity
ECM (WP 0147, WP 0149). Ensure all
between pin 3 on platform har-
harness connectors are reconnected.
ness ECM J2 connector PL-C5
Verify proper operation of machine
(WP 0018, Figure 218) and all
(TM 5-2410-240-10).
other pins on platform harness
Continuity - Replace platform wiring
ECM J1 connector PL-C4
harness (WP 0150, WP 0155).
(WP 0018, Figure 217).
Ensure all harness connectors are
reconnected. Verify proper operation
of machine (TM 5-2410-240-10).
0020-25
