TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0133-05 Transmission Pilot
10. Using digital multimeter
No Continuity - Proceed to step 11.
Pressure Solenoid Current
(WP 0283), test for continuity
Continuity - Replace pump harness
Below Normal - Continued
between pin 7 on pump harness
(WP 0046). Ensure all harness con-
to engine harness connector
nectors are reconnected. Verify
PH-C1 (WP 0018, Figure 205)
proper operation of machine (TM 5-
and all other pins on pump har-
2410-240-10).
ness to engine harness connector
PH-C1 (WP 0018, Figure 205).
11. Disconnect platform harness to
engine harness connector
PL-C15 (WP 0018, Figure 225)
from engine harness to platform
harness connector EN-C15
(WP 0018, Figure 132).
12. Using digital multimeter
Continuity - Proceed to step 13.
(WP 0283), test for continuity
No Continuity - Replace engine wir-
between pin 11 on engine har-
ing harness assembly (WP 0046).
ness to platform harness connec-
Ensure all harness connectors are
tor EN-C15 (WP 0018, Figure
reconnected. Verify proper operation
132) and pin 7 on engine harness
of machine (TM 5-2410-240-10).
to platform harness connector
EN-C21 (WP 0018, Figure 137).
13. Using digital multimeter
Continuity - Proceed to step 14.
(WP 0283), test for continuity
No Continuity - Replace engine wir-
between pin 18 on engine har-
ing harness assembly (WP 0046).
ness to platform harness connec-
Ensure all harness connectors are
tor EN-C15 (WP 0018, Figure
reconnected. Verify proper operation
132) and pin 8 on engine harness
of machine (TM 5-2410-240-10).
to platform harness connector
EN-C21 (WP 0018, Figure 137).
14. Using digital multimeter
No Continuity - Proceed to step 15.
(WP 0283), test for continuity
Continuity - Replace engine wiring
between pin 11 on engine har-
harness assembly (WP 0046). Ensure
ness to platform harness connec-
all harness connectors are recon-
tor EN-C15 (WP 0018, Figure
nected. Verify proper operation of
132) and all other pins on engine
machine (TM 5-2410-240-10).
harness to platform harness con-
nector EN-C15 (WP 0018, Figure
132).
15. Disconnect platform harness
ECM J2 connector PL-C5
(WP 0018, Figure 218) from
machine ECM (WP 0147, WP
0149).
0020-21
