TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
0133-03 Transmission Pilot
5. Using digital multimeter
Continuity - Proceed to step 6.
Pressure Solenoid Voltage
(WP 0283), test for continuity
No Continuity - Replace pump har-
Above Normal - Continued
between pin 7 on pump harness
ness (WP 0046). Ensure all harness
to engine harness connector PH-
connectors are reconnected. Verify
C1 (WP 0018, Figure 205) and
proper operation of machine (TM 5-
pin 1 on pump harness pilot pres-
2410-240-10).
sure supply solenoid connector
PH-C2 (WP 0018, Figure 206).
6. Using digital multimeter
No Continuity - Proceed to step 7.
(WP 0283), test for continuity
Continuity - Replace pump harness
between pin 7 on pump harness
(WP 0046). Ensure all harness con-
to engine harness connector
nectors are reconnected. Verify
PH-C1 (WP 0018, Figure 205)
proper operation of machine (TM 5-
and all other pins on pump har-
2410-240-10).
ness to engine harness connector
PH-C1 (WP 0018, Figure 205).
7. Disconnect platform harness to
engine harness connector
PL-C15 (WP 0018, Figure 225)
from engine harness to platform
harness connector EN-C15 (WP
0018, Figure 132).
8. Using digital multimeter
Continuity - Proceed to step 9.
(WP 0283), test for continuity
No Continuity - Replace engine wir-
between pin 11 on engine har-
ing harness assembly (WP 0046).
ness to platform harness connec-
Ensure all harness connectors are
tor EN-C15 (WP 0018, Figure
reconnected. Verify proper operation
132) and pin 7 on engine harness
of machine (TM 5-2410-240-10).
to platform harness connector
EN-C21 (WP 0018, Figure 137).
9. Using digital multimeter (WP
No Continuity - Proceed to step 10.
0283), test for continuity between
Continuity - Replace engine wiring
pin 11 on engine harness to plat-
harness assembly (WP 0046). Ensure
form harness connector EN-C15
all harness connectors are recon-
(WP 0018, Figure 132) and all
nected. Verify proper operation of
other pins on engine harness to
machine (TM 5-2410-240-10).
platform harness connector
EN-C15 (WP 0018, Figure 132).
10. Disconnect platform harness
ECM J2 connector PL-C5 (WP
0018, Figure 218) from Machine
ECM (WP 0147, WP 0149).
0020-18
