TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Right Door Wiper Does
12. Disconnect right door wiper/
Not Operate Properly
washer switch harness connector
Continued
C-C7 (WP 0018, Figure 19) from
right door wiper/washer switch.
13. Using digital multimeter, test for
No Continuity - Proceed to step 14.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
right door wiper/washer switch
harness (WP 0228). Ensure all har-
harness connector C-C7 (WP
ness connectors are reconnected.
0018, Figure 19) terminal 6 and
Install a new #26 15A fuse (TM 5-
cab ground.
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
14. Disconnect harness connector C-
C40 (WP 0018, Figure 30) from
harness connector FP-C5 (WP
0018, Figure 170).
15. Using digital multimeter, test for
No Continuity - Proceed to step 16.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
right door wiper/washer switch
harness (WP 0228). Ensure all har-
harness connector C-C7 (WP
ness connectors are reconnected.
0018, Figure 19) terminal 5 and
Install a new #26 15A fuse (TM 5-
cab ground.
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
16. Using digital multimeter, test for
No Continuity - Proceed to step 17.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
rear window wiper switch harness
harness (WP 0228). Ensure all har-
connector C-C7 (WP 0018, Figure
ness connectors are reconnected.
19) terminal 5 and all other termi-
Install a new #26 15A fuse (TM 5-
nals in connector C-C7 (WP 0018,
2410-240-10). Verify proper operation
Figure 19).
of machine (TM 5-2410-240-10).
17. Remove fuse #26 (TM 5-2410-
240-10).
18. Using digital multimeter, test for
No Continuity - Replace right door
continuity (WP 0283) between
wiper/washer switch (WP 0212).
harness connector FP-C5 (WP
Ensure all harness connectors are
0018, Figure 170) terminal 11 and
reconnected. Install a new #26 15A
cab ground.
fuse (TM 5-2410-240-10). Verify
proper operation of machine (TM 5-
2410-240-10).
Continuity - Replace fuse panel
harness (WP 0201). Ensure all
harness connectors are reconnected.
Install a new #26 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
END OF WORK PACKAGE
0022-52