TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Right Door Wiper Does
2. Disconnect right door wiper motor
Not Operate Properly
harness connector RW-C2 (WP
Continued
0018, Figure 241) from right door
wiper motor.
3. Disconnect harness connector
RW-C1 (WP 0018, Figure 240)
from harness connector PL-C23
(WP 0018, Figure 227).
4. Using digital multimeter, test for
No Continuity - Replace right door
continuity (WP 0283) between
wiper motor jumper harness (WP
right door wiper motor harness
0229). Ensure all harness connectors
connector RW-C2 (WP 0018, Fig-
are reconnected. Verify proper opera-
ure 241) terminal 2 and harness
tion of machine (TM 5-2410-240-10).
connector RW-C1 (WP 0018, Fig-
Continuity - Proceed to step 5.
ure 240) terminal 2.
5. Disconnect harness connector
PL-C1 (WP 0018, Figure 214)
from harness connector C-C12
(WP 0018, Figure 22).
6. Using digital multimeter, test for
No Continuity - Replace platform
continuity (WP 0283) between
harness (WP 0150, WP 0155).
harness connector PL-C23 (WP
Ensure all harness connectors are
0018, Figure 227) terminal 2 and
reconnected. Verify proper operation
harness connector PL-C1 (WP
of machine (TM 5-2410-240-10).
0018, Figure 214) terminal 20.
Continuity - Proceed to step 7.
7. Disconnect right door wiper/
washer switch harness connector
C-C7 (WP 0018, Figure 19) from
right door wiper/washer switch.
8. Using digital multimeter, test for
No Continuity - Replace platform
continuity (WP 0283) between
harness (WP 0150, WP 0155).
right door wiper/washer switch
Ensure all harness connectors are
harness connector C-C7 (WP
reconnected. Verify proper operation
0018, Figure 19) terminal 1 and
of machine (TM 5-2410-240-10).
harness connector C-C12 (WP
Continuity - Replace right door wiper/
0018, Figure 22) terminal 20.
washer switch (WP 0212). Ensure all
harness connectors are reconnected.
Verify proper operation of machine
(TM 5-2410-240-10).
0022-47