TM 5-2410-240-23-1
0022
Table 1. Window Wiper and Washer Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Right Door Wiper Does
21. Disconnect harness connector C-
Not Operate Properly
C40 (WP 0018, Figure 30) from
Continued
harness connector FP-C5 (WP
0018, Figure 170).
22. Using digital multimeter, test for
No Continuity - Proceed to step 23.
continuity (WP 0283) between
Continuity - Replace fuse panel har-
harness connector FP-C5 (WP
ness (WP 0201). Ensure all harness
0018, Figure 170) terminal 12 and
connectors are reconnected. Install a
cab ground.
new #11 15A fuse (TM 5-2410-240-
10). Verify proper operation of
machine (TM 5-2410-240-10).
23. Disconnect right door wiper/
washer switch harness connector
C-C7 (WP 0018, Figure 19) from
right door wiper/washer switch.
24. Using digital multimeter, test for
No Continuity - Proceed to step 25.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
right door wiper/washer switch
harness (WP 0228). Ensure all har-
harness connector C-C7 (WP
ness connectors are reconnected.
0018, Figure 19) terminal 1 and
Install a new #11 15A fuse (TM 5-
cab ground.
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
25. Using digital multimeter, test for
No Continuity - Proceed to step 26.
continuity (WP 0283) between
Continuity - Replace lower cab wiring
right door wiper/washer switch
harness (WP 0228). Ensure all har-
harness connector C-C7 (WP
ness connectors are reconnected.
0018, Figure 19) terminal 2 and
Install a new #11 15A fuse (TM 5-
cab ground.
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
26. Using digital multimeter, test for
No Continuity - Replace right door
continuity (WP 0283) between
wiper/washer switch (WP 0212).
right door wiper/washer switch
Ensure all harness connectors are
harness connector C-C7 (WP
reconnected. Install a new #11 15A
0018, Figure 19) terminal 3 and
fuse (TM 5-2410-240-10). Verify
cab ground.
proper operation of machine (TM 5-
2410-240-10).
Continuity - Replace lower cab wiring
harness (WP 0228). Ensure all har-
ness connectors are reconnected.
Install a new #11 15A fuse (TM 5-
2410-240-10). Verify proper operation
of machine (TM 5-2410-240-10).
Test Step 4.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-240-10).
0022-46