TM 5-2410-240-23-2
0048
ETHER VALVE AND BRACKET INSTALLATION
00048
1. Install new gasket (Figure 5, Item 12) on ether valve (Figure 5, Item 7).
2. Install bracket (Figure 5, Item 13), washer (Figure 5, Item 15), bolt (Figure 5, Item 14), washer (Figure 5,
Item 2), and nut (Figure 5, Item 1), on bracket (Figure 5, Item 5).
3. Install ether valve (Figure 5, Item 7), clamp (Figure 5, Item 10), bracket (Figure 5, Item 11), cap (Figure 5,
Item 9), and two bolts (Figure 5, Item 8), on bracket (Figure 5, Item 13).
4. Install cap (Figure 5, Item 9) on bracket (Figure 5, Item 11).
5. Install fitting (Figure 5, Item 6) on ether valve (Figure 5, Item 7).
6. Install clamp (Figure 5, Item 4) and nut (Figure 5, Item 3) on bracket (Figure 5, Item 5).
7. Position bracket (Figure 6, Item 2) as shown in (Figure 6).
8. Install washer (Figure 6, Item 8), bolt (Figure 6, Item 9), bracket (Figure 6, Item 1), washer (Figure 6, Item 3),
and nut (Figure 6, Item 4) on bracket (Figure 6, Item 2).
9. Position two harness brackets (Figure 6, Item 7) on bracket (Figure 6, Item 2).
10. Install two washers (Figure 6, Item 8), bolts (Figure 6, Item 9), harness brackets (Figure 6, Item 7), washers
(Figure 6, Item 6), and nuts (Figure 6, Item 5) on bracket (Figure 6, Item 2).
Figure 6. Ether Bracket Rear Harness.
0048