TM 5-2410-240-23-2
0053
REMOVAL
00053
N OT E
Tag and mark wires to aid installation.
1. Slide lock tab (Figure 1, Item 7) to unlock position and disconnect harness connector (Figure 1, Item 6) from oil
pressure sensor (Figure 1, Item 5).
2. Remove two bolts (Figure 1, Item 3) from bracket (Figure 1, Item 2).
3. Position bracket (Figure 1, Item 2) and wiring harness (Figure 1, Item 8) aside.
4. Remove oil pressure sensor (Figure 1, Item 5) from engine (Figure 1, Item 1).
5. Remove O-ring (Figure 1, Item 4) from oil pressure sensor (Figure 1, Item 5). Discard O-ring.
Figure 1. Oil Pressure Sensor.
0053
END OF TASK
CLEANING AND INSPECTION
00053
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
