TM 5-2410-240-23-2
0053
INSTALLATION
00053
N OT E
Install wires as noted during removal.
1. Install new O-ring (Figure 1, Item 4) on oil pressure sensor (Figure 1, Item 5).
2. Install oil pressure sensor (Figure 1, Item 5) on engine (Figure 1, Item 1). Tighten oil pressure sensor.
3. Connect harness connector (Figure 1, Item 6) on oil pressure sensor (Figure 1, Item 5). Slide lock tab
(Figure 1, Item 7) to lock position.
4. Install bracket (Figure 1, Item 2), wiring harness (Figure 1, Item 8), and two bolts (Figure 1, Item 3) on engine
(Figure 1, Item 1).
END OF TASK
FOLLOW-ON TASKS
00053
1. Install third fuel filter (WP 0066).
2. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0053-3/(4 blank)