TM 5-2410-240-23-2
0055
REMOVAL
00055
N OT E
Tag and mark wires to aid installation.
1. Slide lock tab (Figure 1, Item 1) to unlock position and disconnect harness connector (Figure 1, Item 2) from air
pressure sensor (Figure 1, Item 3).
2. Remove air pressure sensor (Figure 1, Item 3) from engine (Figure 1, Item 4).
3. Remove O-ring (Figure 1, Item 5) from air pressure sensor (Figure 1, Item 3). Discard O-ring.
Figure 1. Air Pressure Sensor.
0055
END OF TASK
CLEANING AND INSPECTION
00055
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
