TM 5-2410-240-23-2
0061
INSTALLATION CONTINUED
N OT E
Install tube as noted during removal.
Do not tighten until each nut and bolt is installed.
18. Position tube (Figure 14, Item 4) on machine and install tube nut (Figure 14, Item 2) on filter base (Figure 14,
Item 3) finger tight.
19. Install tube nut (Figure 14, Item 1) on fuel injection pump (Figure 14, Item 5). Tighten tube nut to 11 lb-ft
(15 Nm).
20. Tighten tube nut (Figure 14, Item 2) to 11 lb-ft (15 Nm).
Figure 14. Third Fuel Filter to Fuel Injector Pump Tube.
0061
END OF TASK
FOLLOW-ON TASKS
00061
1. Install primary fuel filter assembly (WP 0074).
2. Install left engine access panel (WP 0184).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0061-13/(14 blank)
