TM 5-2410-240-23-2
0066
REMOVAL CONTINUED
2. Close fuel shutoff valve (Figure 2, Item 1).
3. Position drain pan and remove filter (Figure 2, Item 3) from base (Figure 2, Item 2).
Figure 2. Fuel Filter.
0066
END OF TASK
CLEANING AND INSPECTION
00066
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
00066
1. Turn new filter (Figure 2, Item 3) clockwise to install on base (Figure 2, Item 2).
2. Tighten new filter (Figure 2, Item 3) until seal contacts base (Figure 2, Item 2), then tighten an additional
1/4 turn, and remove drain pan.
3. Open fuel shutoff valve (Figure 2, Item 1).
4. Install panel (Figure 1, Item 2), and close left engine door (Figure 1, Item 1).
END OF TASK
FOLLOW-ON TASKS
00066
Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0066-3/(4 blank)