TM 5-2410-240-23-2
0067
INSTALLATION CONTINUED
N OT E
Remove plugs and install lines as noted during removal.
4. Connect line (Figure 3, Item 12) and tighten tube nut (Figure 3, Item 11) on base (Figure 3, Item 9).
5. Position tube (Figure 3, Item 4) on bracket (Figure 3, Item 3).
6. Install bolt (Figure 3, Item 13) and nut (Figure 3, Item 5) on bracket (Figure 3, Item 3).
7. Install ether line (Figure 3, Item 8) and tiedown strap (Figure 3, Item 7) on tube (Figure 3, Item 4).
8. Connect hose (Figure 3, Item 6) on base (Figure 3, Item 9).
9. Install clamp (Figure 3, Item 2) and bolt (Figure 3, Item 1) on bracket (Figure 3, Item 3).
Figure 3. Filter Base.
0067
END OF TASK