TM 5-2410-240-23-2
0086
ENGINE OIL COOLER AND OIL FILTER BASE CLEANING AND INSPECTION
00086
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
ENGINE OIL COOLER ASSEMBLY
00086
1. Install two new gaskets (Figure 5, Item 4) on engine oil cooler (Figure 5, Item 2).
2. Install engine oil cooler (Figure 5, Item 2) in engine oil cooler housing (Figure 5, Item 5).
3. Install four nuts (Figure 5, Item 6) on studs (Figure 5, Item 3). Tighten nuts to 16 lb-ft (22 Nm).
4. Install new gasket (Figure 5, Item 1) on engine oil cooler housing (Figure 5, Item 5).
Figure 5. Engine Oil Cooler Assembly.
0086
END OF TASK
