TM 5-2410-240-23-2
0087
CLEANING AND INSPECTION
00087
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
00087
1. Install new gasket (Figure 2, Item 2) on machine.
2. Install front cover (Figure 2, Item 3) on machine.
N OT E
Install bolts in correct location as noted on removal.
Insure gasket and cover are lined up correctly before installing each bolt.
3. Install 15 bolts (Figure 2, Item 3) on front cover (Figure 2, Item 1). Hand tighten only.
4. Tighten 15 bolts (Figure 2, Item 3) on front cover (Figure 2, Item 1).
Figure 2. Front Cover Replacement.
0087
END OF TASK
FOLLOW-ON TASKS
1. Install water pump (WP 0083).
2. Install drive belt and tensioner (WP 0090).
3. Install left engine access panel (WP 0184).
4. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE