TM 5-2410-240-23-2
0124
INSTALLATION CONTINUED
N OT E
Remove caps or plugs from hoses, fittings, and open ports.
Install hoses as noted during removal.
11. Install two brackets (Figure 12, Item 17and 1), three washers (Figure 12, Item 3), and bolts (Figure 12, Item 4)
on winch piston pump (Figure 12, Item 2).
12. Install manifold (Figure 12, Item 10), three washers (Figure 12, Item 18), and bolts (Figure 12, Item 19) on
bracket (Figure 12, Item 17).
13. Install hose clamp (Figure 12, Item 15), washer (Figure 12, Item 16), and bolt (Figure 12, Item 14) on bracket
(Figure 12, Item 17).
14. Connect hose (Figure 12, Item 6) on fitting (Figure 12, Item 5) and manifold (Figure 12, Item 10) and tighten
two clamps (Figure 12, Item 9).
15. Connect hose (Figure 12, Item 7) on manifold (Figure 12, Item 10) and implement pump (Figure 12, Item 2)
and tighten two clamps (Figure 12, Item 8).
16. Connect hose (Figure 12, Item 13) on hydraulic tank (Figure 12, Item 12) and manifold (Figure 12, Item 10) and
tighten two clamps (Figure 12, Item 11).
Figure 12. Hoses, Bracket, Manifold, Winch Piston Pump, and Retaining Hardware.
0124