TM 5-2410-240-23-2
0124
REMOVAL CONTINUED
24. Remove six O-rings (Figure 7, Item 2) from three fittings (Figure 7, Item 1). Discard O-rings.
Figure 7. O-rings on Fittings.
0124
END OF TASK
CLEANING AND INSPECTION
000124
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000124
1. Lubricate six new O-rings (Figure 8, Item 2) with lubricating oil.
2. Install six new O-rings (Figure 8, Item 2) on three fittings (Figure 8, Item 1).
Figure 8. O-rings on Fittings.
0124