TM 5-2410-240-23-2
0150
INSTALLATION CONTINUED
N OT E
Install electrical connectors as noted during removal.
33. Connect platform harness (Figure 28, Item 3) to chassis harness (Figure 28, Item 2) and tighten screw
(Figure 28, Item 4).
34. Install clamp (Figure 28, Item 8) on harness (Figure 28, Item 7).
35. Install clamp (Figure 28, Item 8), washer (Figure 28, Item 6), and bolt (Figure 28, Item 5) on machine
(Figure 28, Item 9).
36. Connect and lock platform harness (Figure 28, Item 10) to chassis harness (Figure 28, Item 1).
Figure 28. Harness Connectors and Retaining Hardware Above Hydraulic Filters.
0150
END OF TASK
FOLLOW-ON TASKS
000150
1. Install left rear access panel (WP 0193).
2. Install right rear access panel (WP 0190).
3. Install right lower door hinge (WP 0255).
4. Install left lower door hinge (WP 0255).
5. Install front floor plate (WP 0205).
6. If arctic kit heater equipped, install arctic kit heater switch and heater harness (WP 0277).
7. Install batteries (WP 0142).
8. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
