TM 5-2410-240-23-2
0163
CLEANING AND INSPECTION
000163
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
N OT E
Lubricate new hydraulic oil filter seal with a light coat of clean hydraulic oil.
1. Turn two new hydraulic system filters (Figure 1, Item 2) clockwise to install on filter base (Figure 1, Item 1).
2. Tighten new hydraulic system filters (Figure 1, Item 2) until seal contacts base, then tighten an additional
3/4-turn.
3. Remove wiping rag from underneath hydraulic system filters (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
000163
1. Install outer batteries (WP 0142).
2. Install right rear access cover (WP 0191).
3. Check hydraulic oil level (WP 0160).
4. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0163-3/(4 blank)