TM 5-2410-240-23-2
0164
CLEANING AND INSPECTION
000164
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000164
N OT E
Lubricate new hydraulic system filter seal with a light coat of clean hydraulic oil.
1. Turn three new hydraulic system filters (Figure 1, Item 2) clockwise to install on filter bases (Figure 1, Item 1).
2. Tighten three hydraulic system filters (Figure 1, Item 2) until seal contacts base (Figure 1, Item 1), then tighten
an additional 1/2-turn.
3. Remove wiping rag from underneath hydraulic system filters (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
000164
1. Install outer batteries (WP 0142).
2. Check hydraulic oil level (WP 0160).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0164-3/(4 blank)