TM 5-2410-240-23-2
0165
HYDRAULIC SYSTEM FILTER BASE REMOVAL CONTINUED
N OT E
Tag and mark harness to aid installation.
Note location of tiedown strap to aid installation.
2. If not arctic kit heater equipped, disconnect temperature sensor harness (Figure 2, Item 2) from chassis
harness (Figure 2, Item 3) and position harness aside.
3. If not arctic kit heater equipped, remove tiedown strap (Figure 2, Item 1), three bolts (Figure 2, Item 4),
washers (Figure 2, Item 5), clip (Figure 2, Item 8), and filter base (Figure 2, Item 6) from bracket (Figure 2,
Item 7). Discard tiedown strap.
Figure 2. Base and Attaching Hardware.
0165
