TM 5-2410-240-23-2
0166
RIGHT DRIVE LOOP FILTER INSTALLATION
000166
N OT E
Install clip, tiedown strap, elbows, oil filter bypass switch, fittings, port, and pressure tap as
noted during removal.
1. Lubricate 10 new O-rings (Figure 8, Item 7) with lubricating oil.
2. Install new O-ring (Figure 8, Item 7) on pressure tap (Figure 8, Item 16).
3. Install pressure tap (Figure 8, Item 16) on tee fitting (Figure 8, Item 12).
4. Install new O-ring (Figure 8, Item 7) on port (Figure 8, Item 13).
5. Install fitting (Figure 8, Item 14) on port (Figure 8, Item 13).
6. Install new O-ring (Figure 8, Item 7) on fitting (Figure 8, Item 14).
7. Install fitting (Figure 8, Item 14) on tee fitting (Figure 8, Item 12).
8. Install cap (Figure 8, Item 15) on pressure tap (Figure 8, Item 16).
9. Install two new O-rings (Figure 8, Item 7) on elbow (Figure 8, Item 18).
10. Install elbow (Figure 8, Item 18) on filter base (Figure 8, Item 10) and tighten nut (Figure 8, Item 11).
11. Install tee fitting (Figure 8, Item 12) on elbow (Figure 8, Item 18) and tighten nut (Figure 8, Item 17).
12. Install two new O-rings (Figure 8, Item 7) on oil filter bypass switch (Figure 8, Item 1).
13. Install oil filter bypass switch (Figure 8, Item 1) on filter base (Figure 8, Item 10).
14. Install two new O-rings (Figure 8, Item 7) on fitting (Figure 8, Item 8).
15. Install fitting (Figure 8, Item 8) on filter base (Figure 8, Item 10).
16. Install elbow (Figure 8, Item 6) on fitting (Figure 8, Item 8) and tighten nut (Figure 8, Item 9).
17. Install new O-ring (Figure 8, Item 7) on elbow (Figure 8, Item 5).
18. Install elbow (Figure 8, Item 5) on filter base (Figure 8, Item 10) and tighten nut (Figure 8, Item 4).
19. Install clip (Figure 8, Item 2) and new tiedown strap (Figure 8, Item 3) on oil filter bypass switch (Figure 8,
Item 1).
0166-10
