TM 5-2410-240-23-3
0202
REMOVAL CONTINUED
C AU T I O N
Cap all A/C hoses and receiver dryer during removal to protect against contamination.
Failure to follow this caution may result in equipment damage.
N OT E
Tag and mark A/C hoses to aid installation.
Note routing of A/C hoses to aid installation.
9. Loosen two fittings (Figure 5, Item 5) and disconnect A/C hoses (Figure 5, Items 7 and 11) from receiver dryer
(Figure 5, Item 4).
10. Remove two O-rings (Figure 5, Item 8) from two A/C hoses (Figure 5, Items 7 and 11). Discard O-rings and
position A/C hoses aside.
N OT E
Note orientation of receiver dryer and routing of A/C hose to aid installation.
11. Remove nut (Figure 5, Item 12), washer (Figure 5, Item 13), two clamps (Figure 5, Items 3 and 2), and receiver
dryer (Figure 5, Item 4) from machine (Figure 5, Item 1) and position A/C hose (Figure 5, Item 6) aside.
12. Remove clamp (Figure 5, Item 2) from receiver dryer (Figure 5, Item 4).
N OT E
Tag electrical connectors to aid installation.
13. Disconnect cab harness (Figure 5, Item 9) from relay harness (Figure 5, Item 10).
Figure 5. A/C Hoses, O-rings, Receiver Dryer, and Retaining Hardware on Condenser Assembly.
0202
