TM 5-2410-240-23-3
0247
REMOVAL CONTINUED
000247
WARN I N G
Engine coolant is very slippery. Immediately wipe up any spills. Failure to follow this
warning may result in injury to personnel.
N OT E
Tag and mark hoses to aid installation.
Note orientation of shutoff valves to aid installation.
Note location of tiedown sraps to aid installation.
t
Plug or cap all hoses and open ports.
36. Remove three tiedown straps (Figure 15, Item 1) from heater hoses (Figure 15, Item 2). Discard tiedown
straps.
37. Loosen eight clamps (Figure 15, Item 3).
38. Disconnect four heater hoses (Figure 15, Item 2) from four connectors (Figure 15, Item 4) and position two
shutoff valves (Figure 15, Item 5) aside.
39. Disconnect four heater hoses (Figure 15, Item 2) from bracket (Figure 15, Item 6).
40. Remove eight clamps (Figure 15, Item 3) from six heater hoses Figure 15, Item 2).
41. Remove six heater hoses (Figure 15, Item 2) from machine.
42. Remove four connectors (Figure 15, Item 4) from two shutoff valves (Figure 15, Item 5).
Figure 15. Heater Hoses, Clamps, Shutoff Valves, and Bracket Underneath Front Floor Plate.
0247
END OF TASK