TM 5-2410-240-23-3
0265
REMOVAL CONTINUED
17. Disconnect three electrical connectors (Figure 14, Item 2) from solenoids (Figure 14, Item 1).
18. Remove tiedown strap (Figure 14, Item 9) from winch harness (Figure 14, Item 8) and winch hose (Figure 14,
Item 7). Discard tiedown strap.
19. Remove winch harness (Figure 14, Item 8) from winch (Figure 14, Item 13).
20. Remove eight bolts (Figure 14, Item 12), washers (Figure 14, Item 14), four clamps (Figure 14, Item 3), and
two winch hoses (Figure 14, Item 11) from motor assembly (Figure 14, Item 10).
21. Loosen 10 fasteners (Figure 14, Item 4) and disconnect six winch hoses (Figure 14, Item 7) from 10 fittings
(Figure 14, Item 5).
22. Remove 12 O-rings (Figure 14, Item 6) from 10 fittings (Figure 14, Item 5) and two winch hoses (Figure 14,
Item 11). Discard O-rings.
Figure 14. Winch, Motor Assembly, Hoses, and O-rings.
0265
END OF TASK
CLEANING AND INSPECTION
000265
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
