TM 5-2410-240-23-3
0270
INSTALLATION CONTINUED
12. Install new O-ring (Figure 18, Item 2) on hose (Figure 18, Item 7).
13. Install hose (Figure 18, Item 7), two flanges (Figure 18, Item 4), shields (Figure 18, Item 6), four washers
(Figure 18, Item 3), and bolts (Figure 18, Item 1) on cylinder (Figure 18, Item 5).
14. Install rubber bushing (Figure 18, Item 10), shield (Figure 18, Item 8), and clamp (Figure 18, Item 9) on hose
(Figure 18, Item 7).
Figure 18. Ripper Lift Cylinder Hydraulic Line - Rear.
0270
END OF TASK
FOLLOW-ON TASKS
000270
1. Fill with hydraulic fluid (WP 0160).
2. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0270-17/(18 blank)