2
TM 5-2410-240-23-3
FIELD MAINTENANCE
-
ARCTIC KIT TROUBLESHOOTING INTRODUCTION
0271
INTRODUCTION
000271
1. This chapter provides information for identifying and correcting malfunctions that may develop during operation
of the D6K Dozer with Winch, and the D6K Dozer with Ripper.
2. The Arctic Kit Troubleshooting Symptom Index (WP 0272) lists common malfunctions that may occur, and
refers to the proper page in Arctic Kit Troubleshooting Procedures (WP 0273).
3. The Arctic Kit Troubleshooting Symptom Index (WP 0272) cannot list all malfunctions that may occur, nor can
troubleshooting list all tests or inspections and corrective actions. If a malfunction is not listed, or is not cor-
rected by the listed corrective actions, notify your supervisor.
4. The Troubleshooting Index (WP 0013) lists all possible trouble codes for the machine. If an error/event code is
active along with a symptom, perform the error/event code troubleshooting first. Document all of the codes and
symptoms before troubleshooting. Some codes may set in the course of testing and should not be diagnosed
in addition to those noted before testing. If there is an error/event code that is not identified, contact your
supervisor.
5. When troubleshooting a malfunction:
a. Locate the symptom or symptoms in Arctic Kit Troubleshooting Symptom Index (WP 0272) that best
describe the malfunction.
b. Turn to the page in Arctic Kit Troubleshooting Procedures (WP 0273) where arctic kit troubleshooting pro-
cedures for the malfunction in question are described.
c.
Perform tasks, answer questions, and perform corrective actions in the order listed until malfunction is cor-
rected. Do not perform any maintenance task unless directed to do so in troubleshooting procedures.
EXPLANATION OF COLUMNS
000271
The columns in the troubleshooting table are defined as follows:
a. MALFUNCTION. A visual or operational indication that something is wrong with the equipment.
b. TEST OR INSPECTION. A procedure to isolate the problem in a system or component.
c.
CORRECTIVE ACTION. A procedure to correct the problem.
END OF WORK PACKAGE
0271-1/(2 blank)
