TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
299-13 Transmission Lever
1. Connect MSD (WP 0016), select
1. If active 299-13 code is present,
Position Sensor Out of
Powertrain D7 ECM, and check for
proceed to step 2.
Calibration
Diagnostic Codes or Event Codes
2. If no active code is present, the
problem does NOT exist at this
time. Resume normal operation.
2. Select Powertrain D7 ECM on the
left side of screen.
3. Select Service (Figure 11, Item 1),
Calibrations (Figure 11, Item 2),
FNR Shifter Sensor Calibrations
(Figure 11, Item 3).
Figure 11. Calibration Selection.
0020