TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
299-8 Transmission Lever
34. Remove Fuse # 5 (Figure 10, Item
Position Sensor Out of
1) from fuse panel (Figure 10, Item
Range - Continued
2) (TM 5-2410-241-10).
Figure 10. Fuse #5.
0020
35. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring harness
connector A-C1 (WP 0018,
Figure 22).
36. Using a digital multimeter (WP
1. If continuity is NOT found, proceed
0296), test for continuity between
to step 37.
pin 3 on fuse panel wiring harness
2. If continuity is found, replace fuse
connector A-C1 (WP 0018,
panel wiring harness (WP 0181).
Figure 22) and machine ground.
Replace Fuse #5 (TM 5-2410-241-
10). Ensure all harness connec-
tors are reconnected. Verify cor-
rect operation of machine (TM 5-
2410-241-10).
37. Disconnect platform harness con-
nector MA-C14 (WP 0018, Figure
33) from steering control harness
connector X-C1 (WP 0018,
Figure 34).
38. Disconnect platform harness con-
nector MA-C13 from RH console
harness (WP 0018, Figure 158).
