TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
299-8 Transmission Lever
27. Turn ignition switch and battery
Position Sensor Out of
disconnect switch to OFF position
Range - Continued
(TM 5-2410-241-10).
28. Reconnect dash harness brake
position sensor connector E-C27
(WP 0018, Figure 52) on brake
pedal position sensor (WP 0258).
29. Turn ignition switch and battery
1. If Fuse #5 is OK, proceed to step
disconnect switch to ON position
30.
and operate brake pedal several
2. If Fuse #5 is blown, replace brake
times (TM 5-2410-241-10).
pedal position sensor (WP 0258).
Replace Fuse #5 (TM 5-2410-241-
10). Ensure all harness connec-
tors are reconnected. Verify cor-
rect operation of machine (TM 5-
2410-241-10).
30. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
31. Reconnect parking brake switch
connector X-C6 (WP 0018, Figure
44) on parking brake switch (WP
0018, Figure 45).
32. Turn ignition switch and battery
1.
If Fuse #5 is OK, replace forward
disconnect switch to ON position
neutral reverse sensor (WP 0237).
and operate parking brake switch
Ensure all harness connectors are
several times (TM 5-2410-241-10).
reconnected. Verify correct opera-
tion of machine (TM 5-2410-241-
10).
2. If Fuse #5 is blown, replace park-
ing brake switch (WP 0237).
Replace Fuse #5 (TM 5-2410-241-
10). Ensure all harness connec-
tors are reconnected. Verify cor-
rect operation of machine (TM 5-
2410-241-10).
33. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
0020-44
