TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
468-3 Service Brake Pedal
6. Using a digital multimeter (WP
1. If voltage of 23 to 25 volts is found,
Position Sensor Voltage
0296), measure for voltage
proceed to step 7.
Above Normal - Contin-
between pins A and B on dash
2. If 23 to 25 volts is NOT found, pro-
ued
harness brake position sensor
ceed to step 8.
connector E-C27 (WP 0018,
Figure 52).
7. Using a digital multimeter (WP
1. If voltage of 4.5 to 5.5 volts is
0296), measure for voltage
found, replace brake pedal posi-
between pins B and C on dash
tion sensor (WP 0258). Ensure all
harness brake position sensor
harness connectors are recon-
connector E-C27 (WP 0018,
nected. Verify correct operation of
Figure 52).
machine (TM 5-2410-241-10).
2. If 4.5 to 5.5 volts is NOT found,
proceed to step 8.
8. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
0020-71
