TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
468-3 Service Brake Pedal
21. Using a digital multimeter (WP
1. If continuity is found, proceed to
Position Sensor Voltage
0296), test for continuity between
step 22.
Above Normal - Continued
pin 4 on steering control harness
2. If continuity is NOT found, replace
connector X-C1 (WP 0018, Figure
steering control harness (WP
34) and pin 13 on powertrain ECM
0178). Ensure all harness connec-
connector X-C2 (WP 0018,
tors are reconnected. Verify cor-
Figure 4).
rect operation of machine (TM 5-
2410-241-10).
22. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring harness
connector A-C1 (WP 0018,
Figure 22).
23. Using a digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 24.
pin 3 on platform harness connec-
2. If continuity is NOT found, replace
tor MA-C3 (WP 0018, Figure 21)
platform harness (WP 0209) and
and pin A on dash harness brake
instrument panel harness (WP
position sensor connector E-C27
0260). Ensure all harness connec-
(WP 0018, Figure 52).
tors are reconnected. Verify cor-
rect operation of machine (TM 5-
2410-241-10).
24. Remove Fuse # 5 (Figure 24,
Item 1) from fuse panel (Figure 24,
Item 2) (TM 5-2410-241-10).
0020-75