TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
468-3 Service Brake Pedal
46. Using a digital multimeter (WP
1. If continuity is NOT found, proceed
Position Sensor Voltage
0296), test for continuity between
to step 47.
Above Normal - Continued
pin 6 on steering control harness
2. If continuity is found, replace
connector X-C1 (WP 0018, Figure
steering control harness (WP
34) and all other pins in steering
0178). Replace Fuse #5 (TM 5-
control harness connector X-C1
2410-241-10). Ensure all harness
(WP 0018, Figure 34).
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
47. Using a digital multimeter (WP
1. If continuity is NOT found, proceed
0296), test for continuity between
to step 48.
pin 6 on steering control harness
2. If continuity is found, replace
connector X-C1 (WP 0018, Figure
steering control harness (WP
34) and machine ground.
0178). Replace Fuse #5 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
48. Using a digital multimeter (WP
1. If continuity is NOT found, proceed
0296), test for continuity between
to step 49.
pin 2 on platform harness connec-
2. If continuity is found, replace plat-
tor MA-C13 (WP 0018, Figure
form harness (WP 0209) and
158) and all other pins in platform
instrument panel harness (WP
harness connector MA-C13 (WP
0260). Replace Fuse #5 (TM 5-
0018, Figure 158).
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
49. Using a digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
right cab switch panel harness
pin 2 on platform harness connec-
(WP 0179). Replace Fuse #5 (TM
tor MA-C13 (WP 0018, Figure
5-2410-241-10). Ensure all har-
158) and machine ground.
ness connectors are reconnected.
Verify correct operation of
machine (TM 5-2410-241-10).
2. If continuity is found, replace plat-
form harness (WP 0209) and
instrument panel harness (WP
0260). Replace Fuse #5 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
0020-80
