TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
468-3 Service Brake Pedal
10. Remove Fuse # 5 (Figure 23,
Position Sensor Voltage
Item 1) from fuse panel (Figure 23,
Above Normal - Contin-
Item 2) (TM 5-2410-241-10).
ued
Figure 23. Fuse #5.
0020
11. Using a digital multimeter (WP
1. If continuity is found, install Fuse
0296), test for continuity between
#5 on fuse panel, and proceed to
blades of Fuse #5.
step 12.
2. If continuity is NOT found, replace
Fuse #5, and proceed to step 26.
12. Remove left platform access panel
(WP 0207).
13. Disconnect platform harness con-
nector MA-C14 (WP 0018,
Figure 33) from steering control
harness connector X-C1 (WP
0018, Figure 34).
14. Using a digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 15.
pin 65 on platform harness con-
2. If continuity is NOT found, replace
nector MA-C14 (WP 0018,
platform harness (WP 0209) and
Figure 33) and pin C on dash har-
instrument panel harness (WP
ness brake position sensor con-
0260). Ensure all harness connec-
nector E-C27 (WP 0018,
tors are reconnected. Verify cor-
Figure 52).
rect operation of machine (TM 5-
2410-241-10).
