TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1404-5 Transmission Sole-
4. Remove two bolts (Figure 67,
noid Valve #4 Current
Item 3) and guard (Figure 67,
Below Normal - Contin-
Item 4) from machine.
ued
5. Remove 15 bolts (Figure 67,
Item 1) and plate (Figure 67,
Item 2) from machine.
Figure 67. Guard, Plate, and Retaining Hardware.
0020
6. Disconnect transmission solenoid
valve #4 connector P-C6 (WP
0018, Figure 74) from transmis-
sion solenoid valve #4 (WP 0145).
7. Insert a jumper wire between pins
1 and 2 on transmission solenoid
valve #4 connector P-C6 (WP
0018, Figure 74).
8. Turn ignition switch and battery
disconnect switch to ON position
(TM 5-2410-241-10).
9. Check for Diagnostic Codes (WP
1. If active 1405-6 code is present,
replace transmission solenoid
valve #1 (WP 0145). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If active 1405-5 code is present,
proceed to step 10.