TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1404-6 Transmission Sole-
4. Remove two bolts (Figure 69,
noid Valve #4 Current
Item 3) and guard (Figure 69,
Above Normal - Contin-
Item 4) from machine.
ued
5. Remove 15 bolts (Figure 69,
Item 1) and plate (Figure 69,
Item 2) from machine.
Figure 69. Guard, Plate, and Retaining Hardware.
0020
6. Disconnect transmission solenoid
valve #4 connector P-C6 (WP
0018, Figure 74) from transmis-
sion solenoid valve #4 (WP 0145).
7. Turn ignition switch and battery
disconnect switch to ON position
(TM 5-2410-241-10).
8. Check for Diagnostic Codes (WP
1. If active 1404-5 code is present,
replace transmission solenoid
valve #1 (WP 0145). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If active 1404-6 code is present,
proceed to step 9.
9. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).